RGBW DMX Decoder

Description: 4CH CV DMX DECODER
Power: DC12V – DC24V
CRI: N/A
Output: DMX 512
Input: 12 – 24V
Size: 175 X 42 X 33mm
Notes

Description

RGBW DMX decoder to be used with a power supply with 12V or 24V DC.
512 Addressable via dip switches.

Designers comment: I use the LT DMX decoder for colour change installations that are retro fit into an existing project, additions / after thoughts or the distance from the consumer units is to far. The drivers can be connected in a loop so cable runs are at a minimum. Currently we are using this with a Control 4 install in a large house where LED strip lengths and voltage drop is considered. I have seen even with large installtions in London mistakes made with voltage and once installed can cause large losses in budget.

Red, blue, Green, and White control via any DMX output.

Please contact us to discuss colour change LED design so you avoid mistakes on installtion.